New polymer tensiometers: measuring matric pressures down to the wilting point

G. Bakker, M.J. van der Ploeg, G.H. de Rooij, C.W. Hoogendam, H.P.A. Gooren, C. Huiskes, L.K. Koopal, H. Kruidhof

Research output: Contribution to journalArticleAcademicpeer-review

45 Citations (Scopus)

Abstract

Tensiometers are commonly used for measuring soil water matric pressures. Unfortunately, the water-filled reservoir of conventional tensiometers limits their applicability to soil water matric pressures above approximately ¿0.085 MPa. Tensiometers filled with a polymer solution instead of water are able to measure a larger range of soil water matric pressures. We designed and constructed six prototype polymer tensiometers (previously called osmotic tensiometers) consisting of a wide-range pressure transducer with a temperature sensor, a stainless steel casing, and a ceramic plate with a membrane preventing polymer leakage. A polymer chamber (0.1¿2.2 cm3) was located between the pressure transducer and the plate. We tested the polymer tensiometers for long-term operation, the effects of temperature, response times, and performance in a repacked sandy loam under laboratory conditions. Several months of continuous operation caused a gradual drop in the osmotic pressure, for which we developed a suitable correction. The osmotic potential of polymer solutions is temperature dependent, and requires calibration before installation. The response times to sudden and gradual changes in ambient temperature were found to be affected by polymer chamber height and polymer type. Practically useful response times (
Original languageEnglish
Pages (from-to)196-202
JournalVadose Zone Journal
Volume6
Issue number1
DOIs
Publication statusPublished - 2007

Keywords

  • osmotic tensiometer
  • thermodynamics
  • performance

Fingerprint

Dive into the research topics of 'New polymer tensiometers: measuring matric pressures down to the wilting point'. Together they form a unique fingerprint.

Cite this