Effect of hydraulic parameters on sediment transport capacity in overland flow over erodible beds

M. Ali, G. Sterk, K.M. Seeger, M.P. Boersema, P.D. Peters

Research output: Contribution to journalArticleAcademicpeer-review

69 Citations (Scopus)

Abstract

Sediment transport is an important component of the soil erosion process, which depends on several hydraulic parameters like unit discharge, mean flow velocity, and slope gradient. In most of the previous studies, the impact of these hydraulic parameters on transport capacity was studied for non-erodible bed conditions. Hence, this study aimed to examine the influence of unit discharge, mean flow velocity and slope gradient on sediment transport capacity for erodible beds and also to investigate the relationship between transport capacity and composite force predictors, i.e. shear stress, stream power, unit stream power and effective stream power. In order to accomplish the objectives, experiments were carried out in a 3.0m long and 0.5m wide flume using four well sorted sands (0.230, 0.536, 0.719, 1.022 mm). Unit discharges ranging from 0.07 to 2.07 x 10(-3) m(2) s(-1) were simulated inside the flume at four slopes (5.2, 8.7, 13.2 and 17.6 %) to analyze their impact on sediment transport rate. The sediment transport rate measured at the bottom end of the flume by taking water and sediment samples was considered equal to sediment transport capacity, because the selected flume length of 3.0m was found sufficient to reach the transport capacity. The experimental result reveals that the slope gradient has a stronger impact on transport capacity than unit discharge and mean flow velocity due to the fact that the tangential component of gravity force increases with slope gradient. Our results show that unit stream power is an optimal composite force predictor for estimating transport capacity. Stream power and effective stream power can also be successfully related to the transport capacity, however the relations are strongly dependent on grain size. Shear stress showed poor performance, because part of shear stress is dissipated by bed irregularities, bed form evolution and sediment detachment. An empirical transport capacity equation was derived, which illustrates that transport capacity can be predicted from median grain size, total discharge and slope gradient
Original languageEnglish
Pages (from-to)591-601
JournalHydrology and Earth System Sciences
Volume16
Issue number2
DOIs
Publication statusPublished - 2012

Keywords

  • soil-erosion model
  • semiarid hillslope
  • rill hydraulics
  • rough surfaces
  • interrill flow
  • irregular beds
  • steep slopes
  • shallow flow
  • detachment
  • equation

Fingerprint

Dive into the research topics of 'Effect of hydraulic parameters on sediment transport capacity in overland flow over erodible beds'. Together they form a unique fingerprint.

Cite this