TY - JOUR
T1 - Aluminium dross waste utilization for phosphate removal and recovery from aqueous environment
T2 - Operational feasibility development
AU - Mittal, Yamini
AU - Srivastava, Pratiksha
AU - Tripathy, Bankim Chandra
AU - Dhal, Nabin Kumar
AU - Martinez, Fernando
AU - Kumar, Naresh
AU - Yadav, Asheesh Kumar
PY - 2024/2
Y1 - 2024/2
N2 - The need to minimize eutrophication in water bodies and the shortage of phosphate rock reserves has stimulated the search for sequestration and recovery of phosphate from alternative sources, including wastewater. In this study, aluminium dross (AD), a smelting industry waste/by-product, was converted to high-value material by encapsulation in calcium alginate (Ca-Alg) beads, viz. Ca-Alg-AD and utilized for adsorptive/uptake removal and phosphate recovery from an aqueous environment. Encapsulation of AD in alginate beads solves serious operational difficulties of using raw AD material directly due to density difference constraining efficient contact of AD with pollutants present in water and post-treatment recovery of AD material. The phosphate removal was evaluated in both batch and continuous flow operation modes. The batch adsorption study revealed 96.86% phosphate removal from 10 mg L−1 of initial phosphate concentration in 70 min of optimal contact time. Further, the phosphate removal potential of Ca-Alg-AD beads turned out to be independent of solution pH, with an average of 95.93 ± 1.40 % phosphate removal in the 2–9 pH range. The result reflects phosphate adsorption on Ca-Alg-AD beads following a second-order pseudo-kinetic model. Ca-Alg-AD beads-based adsorption followed Freundlich and Langmuir isotherm models. Further, a continuous packed bed column study revealed a total phosphate adsorption capacity of 1.089 mg g−1. The chemical composition, physical stability, and surface properties of Ca-Alg-AD beads were analyzed by means of state-of-the-art analytical techniques, such as Scanning Electron Microscopy-Energy Dispersive X-ray spectroscopy (SEM-EDX), Fourier Transform Infrared Spectroscopy (FTIR) and thermogravimetry/Differential Thermal Analysis (TG/DTA). These characterization techniques comprehend the mechanism and influence of surface properties and morphology on the phosphate adsorption behaviour, which induce the involvement of multiple mechanisms such as ligand complexation, ion exchange, and electrostatic attraction for phosphate adsorption on Ca-Alg-AD beads.
AB - The need to minimize eutrophication in water bodies and the shortage of phosphate rock reserves has stimulated the search for sequestration and recovery of phosphate from alternative sources, including wastewater. In this study, aluminium dross (AD), a smelting industry waste/by-product, was converted to high-value material by encapsulation in calcium alginate (Ca-Alg) beads, viz. Ca-Alg-AD and utilized for adsorptive/uptake removal and phosphate recovery from an aqueous environment. Encapsulation of AD in alginate beads solves serious operational difficulties of using raw AD material directly due to density difference constraining efficient contact of AD with pollutants present in water and post-treatment recovery of AD material. The phosphate removal was evaluated in both batch and continuous flow operation modes. The batch adsorption study revealed 96.86% phosphate removal from 10 mg L−1 of initial phosphate concentration in 70 min of optimal contact time. Further, the phosphate removal potential of Ca-Alg-AD beads turned out to be independent of solution pH, with an average of 95.93 ± 1.40 % phosphate removal in the 2–9 pH range. The result reflects phosphate adsorption on Ca-Alg-AD beads following a second-order pseudo-kinetic model. Ca-Alg-AD beads-based adsorption followed Freundlich and Langmuir isotherm models. Further, a continuous packed bed column study revealed a total phosphate adsorption capacity of 1.089 mg g−1. The chemical composition, physical stability, and surface properties of Ca-Alg-AD beads were analyzed by means of state-of-the-art analytical techniques, such as Scanning Electron Microscopy-Energy Dispersive X-ray spectroscopy (SEM-EDX), Fourier Transform Infrared Spectroscopy (FTIR) and thermogravimetry/Differential Thermal Analysis (TG/DTA). These characterization techniques comprehend the mechanism and influence of surface properties and morphology on the phosphate adsorption behaviour, which induce the involvement of multiple mechanisms such as ligand complexation, ion exchange, and electrostatic attraction for phosphate adsorption on Ca-Alg-AD beads.
U2 - 10.1016/j.chemosphere.2023.140649
DO - 10.1016/j.chemosphere.2023.140649
M3 - Article
C2 - 37952825
AN - SCOPUS:85179601461
SN - 0045-6535
VL - 349
JO - Chemosphere
JF - Chemosphere
M1 - 140649
ER -
